CRYSTAL INFINITY SHIELD
Protective System
User Manual Crystal Infinity Shield 9H
The cleaning process prior to paint correction and application of Crystal Infinity 9H is absolutely crucial in order to achieve long
lasting result. Make sure that all waxes or sealants are removed before starting paint correction and ceramic coating application.
Wash the car by using a basic shampoo free off waxes or silicones. After wash rinse the car with water. Now the car is ready for decontamination of the paint using a clay bar or NanoSkin pad (NanoSkin pad strongly recommended) then dry the surface with a
microfibre towel.
Car Polishing (paint correction): Remove paint imperfection - swirl marks, micro scratches etc. prior to application of the coating by using the correct equipment and polishing compound. After polishing (paint correction) wipe off the residue of the
compound with a microfibre cloth.
The cleaning process prior to paint correction and application of Crystal Infinity 9H is absolutely crucial in order to achieve long
lasting result. Make sure that all waxes or sealants are removed before starting paint correction and ceramic coating application.
Wash the car by using a basic shampoo free off waxes or silicones. After wash rinse the car with water. Now the car is ready for decontamination of the paint using a clay bar or NanoSkin pad (NanoSkin pad strongly recommended) then dry the surface with a
microfibre towel.
IPA / Panel wipe – Used for deep clean of the surface: spray the panel wipe on a microfibre cloth and wipe the entire car to ensure all contamination is removed.
Application of the ceramic coating:
Use the applicator or microfibre applicator sponge included inside the box to apply the 9H coating. Proceed by coating one or two
elements at a time.
Drop fair amount of product on to applicator and apply it evenly line by line vertical and horizontal without forcing too much pressure on the surface. After applying a coating, wait for about 3-5 minutes then use a dry microfibre cloth to wite off residue. (Note: Crystal Infinity Pi must be wiped off one minute after the application). Do not use excessive pressure. Do not wait longer than 5 minutes before first buffing action. Avoid contact with water when applying Crystal Infinity Shield 9H.
For the best results repeat application with Crystal Infinity Shield 9H (second layer but wipe off residue 2-3 minutes after application) or Crystal Infinity Pi as second coat after applying Crystal Infinity Shield 9H. Allow 60-90 minutes between the applications for curing. As a final step of coating it is strongly recommended using Crystal Infinity Hydro to achieve the best results. Please allow 3-5 hours curing time before applying Crystal Infinity Hydro.
Apply to a whole car including the windows. Allow 30-45 minutes, then wipe off the residue from the surface. Crystal Infinity Hydro can be wiped off with a wet microfibre cloth – simply spay some
deionised water onto the cloth and wipe off the product residue. Buff with a dry microfibre cloth as a last step.
In warm conditions coating curing time is about 5-12hrs post application. During that time the vehicle should not be used. Full curing time is up to 14 days so do not wash your car for the first two weeks. Crystal Infinity Shield protection will reach its maximum hardness and is safe for the first wash 2 weeks post treatment.
To speed up the time of full dryness, you can use infrared heater lamps.
Crystal Infinity Shield
Satisfaction Guaranteed
Call us today
+44 7497 337 670
or